<p>When safeguarding your electrical systems, the right surge protection device (SPD) is essential. This SPD offers robust protection with a rated voltage of 230 VAC and impressive current ratings of 100 kA for line-to-neutral (L-N) and 60 kA for neutral-to-protective earth (N-PE). Designed for three-phase systems, it ensures that your equipment is shielded from voltage spikes that can cause costly downtime or damage.</p><p>The SPD features a digital display, providing clear and accurate readings at a glance. Its shunt connection type facilitates easy integration into existing systems, while the panel mounting type ensures secure installation. With dimensions of 200 mm in width, 80 mm in height, and a depth of 200 mm, this device fits neatly into various setups without occupying excessive space.</p><p>Built to withstand harsh environments, the SPD operates efficiently within an extensive temperature range from -40 to 70 degrees Celsius and maintains performance in humidity levels between 5% to 95%. The IP20 degree of protection signifies its resistance against solid objects larger than 12.5 mm but requires careful installation away from moisture-prone areas.</p><p>Constructed from durable aluminium material, the SPD weighs in at just 2.7 kg—making it both sturdy and manageable during installation or maintenance tasks. It adheres to multiple standards including IEC 61643-11:2011, AS/NZS 1768:2007, UL 1449 (3rd Edition), and IEEE standards ensuring compliance with international safety protocols.</p><p>The device boasts rapid response times of less than 25 ns for L-N connections and under 100 ns for N-PE connections—crucial for minimizing potential damage from transient surges. With a tightening torque specification ranging from 0.5 N-m to up to two N-m depending on application needs this SPD provides flexibility during setup.</p><p>For added security it supports lightning impulse currents of up to either twelve point five kA or fifteen kA as well as modes protecting line-to-line L-L line-to-neutral L-N as well as neutral-to-protective-earth N-PE configurations The interrupt rating stands at one hundred amps complemented by a fuse rating set at sixty-three amps enhancing overall system reliability</p><p>The contact configuration follows SPDT standards which further broadens its applicability across different industrial scenarios Additionally its voltage protection level stays below eight hundred volts ensuring sensitive electronics remain unharmed during unexpected power fluctuations</p><p>This comprehensive combination makes this surge protection device an ideal choice when looking for reliable efficient solutions designed specifically with commercial industrial applications in mind</p>