Products

Position Switches & Sensors

SCHMERSAL MICRO SWITCH 101055284

Product Code: 101055284

Technical Specifications

No. of Actuating Directions 2
Brand SCHMERSAL
Active Area Plastic
Actuating Torque (Nm) 0.31
Actuator Type Offset roller lever
Actuator Type to EN 50047 A
Assured "OFF" Switching Distance (mm) 22 | 32
Assured "ON" Switching Distance (mm) 10 | 20
Bounce Duration Bounce duration in accordance with actuating speed
Cable Entry Rear
Cable Length (m) 3
Cable Note All indications including the conductor ferrules.
Castor Diameter (mm) 22
Coding Level According to EN ISO 14119 Low
Coding Type Universal coding
Colour of The Front Ring Silver
Connector Type Connector plug M12, 4-pole
Contact Material Silver
Degree of Protection IP67
Depth (mm) 60
Design Round
Design of Control Element p-type
Detection Ability for Test Bodies @ V = 1.6 m/s 30 mm
Direction of Motion Head-on to the active surface
EAN 4030660000000
eCl@ss Number, Version 11.0 27-27-06-12
eCl@ss Number, Version 9.0 27-27-06-12
Enclosure Coating Material Nickel-plated
Enclosure Material Aluminium
ETIM 6.0 EC000030
ETIM 7.0 EC000030
Explosion Protection Category 3D | 3G
Explosion Protection Zones 22 | 2
Front Ring Material Aluminium
Gross Weight (g) 19.081
Height (mm) 103
Height of The Protection Field (mm) 650
Housing Construction Form Cylinder thread
Installation Conditions Quasi-flush
Integral System Diagnostics Status Yes
Latching Force (N) 30
Lever Material Metal film
Material of The Cable Mantle PVC
Material of The Operators Aluminium
Maximum Actuating Speed (m/s) 1
Maximum Ambient Temperature (°C) 80
Maximum Bounce Duration (ms) 2
Maximum Cable Cross Section (mm²) 2.5
Maximum Electrical Power Consumption (W) 10
Maximum Fuse Rating 6 A gG D-fuse
Maximum Holding Force (N) 2600
Maximum Leakage Current (mA) 0.5
Maximum No-load Supply Current (mA) 600
Maximum Output Current (A) 0.25
Maximum Permissible Installation Altitude Above Sea Level (m) 2000
Maximum Protection Field (mm) 7000
Maximum Reaction Time (ms) 10
Maximum Relative Humidity 95%
Maximum Switching Capacity (VA) 120
Maximum Switching Current (A) 0.01
Maximum Switching Frequency (Hz) 5
Maximum Switching Voltage DC (V) 24
Minimum Actuating Force (N) 9
Minimum Actuating Speed (mm/min) 60
Minimum Ambient Temperature (°C) -25
Minimum Cable Cross Section (mm²) 0.75
Minimum Mechanical Life 1000000000 Operations
Minimum Positive Break Force (N) 40
Minimum Protection Field (mm) 300
Minimum Relative Humidity 30%
Mounting Type Snaps onto standard DIN rail to EN 60715
Net Weight (g) 92
No. of Auxiliary Contacts 1
No. of Beams 28
No. of Cable Wires 4
No. of Normally-open Contacts 1
No. of Safety Contacts 2
Overvoltage Category 3
Pollution Degree 3
Positive Break Torque (Nm) 0.6
Positive Break Travel (mm) 3.5
Protection Class of Operating Resource 3
Rated Control Voltage DC (V) 24
Rated Impulse Withstand Voltage (kV) 6
Rated Insulation Voltage (V) 500
Rated Operating Current (mA) 2100
Rated Short-circuit Current (A) 1000
Recipient Terminal Connector Type Connector plug M12, 5-pole
Recommended Actuator BPS 40S-2 | BPS 40S-1-C | BPS 40S-2-C
Recommended Safety Switchgear SRB-E 301
Resistance to Shock (g/ms) 30 / 11
Roller Material Plastic
Sealing Type Form seals / Lip gaskets / Membrane
Sensor Height (mm) 100
Sensor Length (mm) 30
Spacing (mm) 40 x 50
Standards EN IEC 60947-5-1 / EN IEC 60947-1
Storage Temperature (°C) -40 to 85
Switching Element Opener (NC)
Switching Principle slow action, positive break NC contact
Switchover Time Switchover time in accordance with actuating speed
Switchover Time (ms) 5.5
Terminal Type Screw terminals M20 x 1.5
Tolerance 10%
Utilisation Category DC-13 | AC-15
Utilisation Category AC-15 230 VAC
Utilisation Category DC-13 24 VDC
Version Round | Push button
Voltage Type DC
Wavelength of The Sensor (nm) 880
Width (mm) 40
Wire Cross-Section 23 AWG
Working Principle Electromechanical

Documents

Products to compare:
Comparing Products